Single · Double · Floating · Custom

Bathroom Vanity Installation in Bellingham, WA

A new vanity changes how a bathroom looks and how well it works every day. Bathroom Remodeling Bellingham installs single, double, floating, and custom vanities across Whatcom County, mounted level and secure, with clean plumbing connections and a sealed countertop and backsplash.

Call Now: (360) 355-9519

Licensed & insured in Washington · Permits handled · 15+ years · 200+ local projects

Vanity installation includes

  • Old vanity removal and haul-away
  • Wall and floor prep
  • Level, secure mounting
  • Sink, faucet, and drain hookup
  • Countertop, backsplash, and sealing

Call for a free estimate:
(360) 355-9519
510 Carolina St, Bellingham, WA 98225

15+

Years remodeling bathrooms

200+

Projects in Whatcom County

WA

Licensed & insured

Permits

Handled for you

New bathroom vanity cabinet installed in Bellingham, WA

More than a cabinet

A Vanity That Fits Your Space and Your Routine

The vanity is the part of the bathroom you use most: brushing, shaving, storing everything from towels to hair dryers. A good one gives you counter space where you need it, storage that makes sense, and a height that’s comfortable to use.

Installation matters as much as the cabinet. It has to be level and anchored, the drain has to line up without strain, and the countertop and backsplash need to be sealed so splashes don’t reach the cabinet or wall.

  • Comfort-height and standard-height options
  • Soft-close drawers and smart storage
  • Single or double sinks
  • Old shutoff valves and supply lines replaced when needed

Vanity styles

Bathroom Vanity Options We Install

We install vanities you’ve picked out, or help you choose one that fits your room.

Single-sink vanities

The go-to for hall bathrooms and powder rooms, with plenty of options in every width.

Double-sink vanities

Two sinks for shared primary bathrooms. We make sure the drain and supply lines are set up for both.

Floating (wall-mounted) vanities

Mounted to solid blocking in the wall, leaving open floor that makes small rooms feel bigger and easier to clean.

Comfort-height vanities

Taller cabinets, closer to kitchen counter height, so there’s less bending over the sink.

Custom & semi-custom vanities

Built to fit odd spaces, sloped ceilings, or specific storage needs.

Countertops & sinks

Quartz, solid surface, or stone tops with undermount or vessel sinks and new faucets.

Installed right

What a Good Vanity Installation Looks Like

These details keep a vanity looking new for years.

Level & anchored

Cabinets are shimmed level and screwed into studs or blocking. Floating vanities get solid blocking installed inside the wall.

Clean plumbing

New supply lines and, when needed, new shutoff valves. The drain lines up without strain, and we check for leaks.

Sealed surfaces

The countertop, backsplash, and sink are sealed so water can’t soak into the cabinet or wall.

Swapping a vanity in the same spot is usually considered finish work. Moving the sink drain or supply lines can require a plumbing permit, which we handle.

Call Now: (360) 355-9519

How it works

Our Vanity Installation Process

Most vanity installs are quick and clean.

01

Measure & plan

We measure the space, check the plumbing location, and help you pick size, height, and style.

02

Remove & prep

We remove the old vanity, repair the wall and floor, and adjust plumbing or add blocking if needed.

03

Install & finish

We mount the vanity, set the top, sink, and faucet, connect and test the plumbing, and seal everything.

Cost & timeline

How Much Does Vanity Installation Cost in Bellingham?

A same-size vanity swap is quick and affordable. Cost rises with double sinks, floating vanities that need wall blocking, moved plumbing, and stone countertops.

Most standard vanity installs are finished in a day. We give you an itemized estimate before we start.

  • Vanity size and type
  • Countertop material
  • Moving drain or supply lines
  • Wall or floor repair
Call for a Free Estimate

Sizing guide

FeatureTypical range
Standard vanity heightAbout 30–32 inches
Comfort-height vanityAbout 34–36 inches
Single-sink widthAbout 24–48 inches
Double-sink widthUsually 60 inches or more

Sizes vary by manufacturer. We measure your space and doorways before you order.

FAQ

Bathroom Vanity FAQs

Common questions about installing a new bathroom vanity. Don’t see yours? Call us at (360) 355-9519.

Call With Your Question

Most same-size vanity installations take a few hours to a day. Double vanities, floating vanities, and plumbing changes can add time.

Yes. We’re happy to install a vanity you’ve already purchased. We’ll check the size and plumbing layout before install day.

Standard vanities are about 30 to 32 inches tall. Comfort-height vanities are about 34 to 36 inches, which many adults find easier on the back.

Often, yes, if there’s enough width, usually 60 inches or more. The drain and supply lines need to be adjusted for the second sink.

Yes, when they’re mounted to solid blocking inside the wall. We add blocking during installation if it’s not already there.

A like-for-like replacement is usually finish work. Moving plumbing may need a permit, which we take care of.

Related services

More Bathroom Services in Bellingham

Free estimate

Ready for a New Vanity?

Call us to talk about the vanity you want. We’ll measure your space, check the plumbing, and give you a clear estimate.

Call Now: (360) 355-9519

Bathroom Remodeling Bellingham · 510 Carolina St, Bellingham, WA 98225 · (360) 355-9519